1100°C Vertical High Temperature Muffle Furnace Controlled Atmosphere Sintering For Melting
Product Specifications
| Attribute | Value |
| Range of Applications | Industrial |
| Type | Electric Holding Furnace |
| Usage | Ceramic Sintering |
| Fuel | Electric |
| Atmosphere | Nitrogen/Hydrogen |
| Effective Chamber Dimensions | 500*500*650mm (W*H*D) |
| Transport Package | Wooden Packaging |
| Specification | 1500*1950*2200mm (W*H*D) |
| Trademark | Chitherm |
| Origin | China |
| HS Code | 8514101000 |
| Supply Ability | 50 Sets/Year |
| Customization | Available |
| Certification | ISO |
| Place Style | Vertical |
Product Description
1100°C Vertical HWF100-10NH Atmosphere Sintering Furnace for Melting and Sintering in Industrial Applications
Application Field
Mainly used for sintering processes of related materials under the protection of nitrogen or nitrogen-hydrogen atmospheres, and can also be applied to sintering processes of related materials under protective atmospheres.
Technical Specifications
- Rated Temp.: 900°C
- Max Temp: 1100°C
- Atmosphere: N2, H2
- Oxygen Content: Measured by O2 content analyzer
- Muffle Material: SUS 310S
- Vessel dimensions: φ630mm×900mm (d×D)
- Effective Chamber Dimensions: 400×400×650mm (W×H×D)
- Cooling method: Natural cooling
- Heating element: FEC ceramic fiber heater
- Temperature control stability: ±1°C, with PID parameter self-tuning function
- Temperature uniformity: ±5°C (tested under no-load condition at 900°C for 1 hour)
- Temperature control thermocouple: K-type thermocouple
- Temperature control points: 3 independent control points (front, middle, rear)
- Temperature control segments: 9 segments
- Sintering atmosphere: Nitrogen + Hydrogen
- Oxygen content detection: Equipped with a micro-oxygen analyzer to monitor furnace oxygen content
- Oxygen content: 20ppm + oxygen content of gas source
- Exhaust gas treatment: Ignition device installed at the exhaust port to burn residual hydrogen in exhaust gas
- Alarm protection: Over-temperature, thermocouple break, low air pressure, low water pressure, ignition alarm, and over-temperature alarm with power cutoff protection
- Design power: 30kW
- Typical no-load heat preservation power: ≤15kW
- Heating rate: ≤5°C/min
- Surface temperature rise: <35°C
- Weight: 1100kg
- Appearance Colour: Light Grey
- External Dimensions: 1500mm×1950mm×2200mm (W×H×D)
Delivery List
| Item | Note | Qty. |
| Basic Components | Furnace | 1 SET |
| Inspection Certificate | Certificate of major outsourced components | 1 SET |
| Technical Documents | Instructions, technical documents of the major outsourced parts, etc | 1 SET |
| Key Components | Micro-oxygen analyzer | 1 SET |
| Temperature Controller | | 1 SET |
| Thermocouple | Type K | 3 PCs |
| Spare Parts | SSR | 1 PC |
Facility Requirements
- Environmental Conditions: temp.: 0~40°C, humidity ≤ 80%RH, no corrosive gas, no strong airflow disturbance
- N2 Conditions: 99.999% purity, working pressure: 0.2-0.4MPa, Max gas consumption 2-6 m³/h
- H2 Conditions: working pressure: 0.2-0.4MPa, Max gas consumption 0.2-0.6m³/h
- Water Conditions: clean, no corrosive water, working pressure 0.1-0.3MPa, 1-3L/min
- Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 10m³/h
- Ground Requirements: horizontal, no obvious vibration, load-bearing> 500 kg/m²
- Power Condition(TBD): capacity > 40kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green
- Installation Site: 3200mm×2500mm×3000mm (D×W×H), with an installation area greater than 8m²
