Attribute	Value
Range of Applications	Industrial
Type	Electric Holding Furnace
Usage	Ceramic Sintering
Fuel	Electric
Atmosphere	Air/O2
Effective Chamber Dimensions	450450500mm (WHD)
Transport Package	Wooden Packaging
Specification	99016801095mm
Trademark	Chitherm
Origin	China
HS Code	8514101000
Supply Ability	50 Sets/Year
Customization	Available
Certification	ISO
Place Style	Vertical

Product Description

Electric Holding Furnace 1000°C Mnf100-10 Cleanliness Box Melting Industrial Furnace for Electric Industrial Processes

Equipment Name and Model

MBF100-10 Type Medium-Temperature Clean Box Furnace

Application Fields

Mainly used for high-temperature heat treatment processes of similar products such as electronic devices and electronic ceramics.

Technical Specifications and Basic Configuration

Rated Temperature: 900°C
Maximum Temperature: 1000°C
Inner Lining Material: Fused Quartz
Effective Dimensions: 450 × 450 × 500mm (W × H × D)
Heating Rate: ≤10°C/min
Heating Elements: FEC ceramic fiber heating plates, heating from all four sides
Temperature Stability: ±1°C, with PID parameter self-tuning function
Temperature Uniformity: ±5°C (tested with an empty furnace at constant temperature of 900°C)
Thermocouple Type: K-type
Number of Temperature Control Points: 1 point
Number of Temperature Control Segments: 9 segments
Exhaust Chimney: Equipped with an exhaust port at the rear, which can be manually adjusted
Inlet Design: Allows the introduction of dry, clean, oil-free compressed air or oxygen into the furnace chamber
Alarm Protection: Over-temperature, open circuit, etc., with audible and visual alarm protection
Maximum Heating Power: 16 kW
Typical Insulation Power for an Empty Furnace: ≤8 kW
Surface Temperature Rise: <35°C
Equipment Weight: Approximately 450 Kg
Equipment Exterior Color: Light Grey
Reference External Dimensions: 990 × 1680 × 1095mm (W × H × D)

Delivery List

Item	Note	QTY
Basic Compositions	Furnace	1 unit
Certificates of Inspection	Furnace and major purchased components	1 Set
Technical Documents	Furnace specifications, technical documents of major purchased components, etc	1 Set
Key Parts	Touch screen	1 PC
Temperature Controller		1 Set
FEC Heater		1 Set
Quartz Liner		1 Set
Spares	SSR	1 PC

Facility Requirements

Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance
Ground requirements: level, no obvious vibration, bearing capacity > 500Kg/m²
Power conditions: capacity greater than 22kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz (according to local situation)
Installation site: 2000mm×2000mm×3000mm (W×H×D), installation area greater than 4m²

Inquiry Cart 0